XPS Foam Board Wall Insulation High Density Foam Insulation Board

Product Description

What are XPS Foam boards ?

 

XPS foam is an insulation board manufactured of fully recyclable material. It is produced from foamed polystyrene, a material that doe's not deteriorate. The cell structure in the board is built up of very fine closed cells that give the product its excellent physical and mechanical characteristics.

  

An excellent insulation that saves energy 

This special cell structure means that the sheet doe's not conduct heat. When you lay XPS boards as an underlay any heat from your room or floor will be reflected back towards the floor surface. As you will not be wasting heat through your floor you will utilize your energy in an effective manner and thereby lower your energy consumption and carbon footprint.

  

Effective protection against cold and damp

XPS boards not only take care of the heat, they are also an effective guard against the cold and damp. The cold will be held back by the non conducting characteristics of the foam and as XPS board is also water repellent it will not rot or go mouldy and will help hold back any damp from your floor.

XPS boards are also resistant to cement, plaster, and most alkalis, however not against organic solvents.

 

item	Value	unit
Compressive Strength	150-700	KPA
Water Absorption (immersion 96h)	≤1.5	(v/v)
Moisture Permeability coefficient	≤3.5	ng/(m·s·pa)
Thermal Conductivity	0.030-0.036	W/(m·k)
Dimensional stability	≤1.5(length, width, height)	%
density	28-55	Kg/m^3
Working temperature range	-50 to +80	ºC
Fire-proofing grade	B1, B2 or No fire-proof	level
Width	<=600	mm
Length	No Limit	mm
Thickness	10-100	mm

Application: